4 Quick Solutions to Fix Spectrum DVR Remote not Working

The Spectrum TV remotes have programmable keys that you can use to control various devices and sometimes even gaming consoles.

The users can use it to access various streaming channels and view TV shows and movies.

The DVR remote uses Infrared technology and each model stands out from the other. However, sometimes the Spectrum DVR remote stops working.

Though we don’t see any technical issues behind it, you might need to look into some issues.

Do you own a Spectrum DVR remote? Are you also facing some issues?

If yes, then you have reached the right page. In today’s post, we are going to share with you some working solutions to fix the Spectrum DVR remote not working issue.

How to Fix Spectrum DVR Remote not Working

Your Spectrum TV remote might fail to work completely or work sparingly with various devices. There are various symptoms that you can detect like channels not getting changed, red LED might be flashing continuously, or LED not illuminating as usual.

Instead of getting a new remote, here are a few methods that you can try to resolve the issue. Many reasons can explain why the Spectrum DVR remote isn’t working, and we’ve provided solutions for the most common problems.

Method 1 – Change the Battery of Spectrum DVR Remote

The batteries control our remotes and as they get low our remote start to function irregularly. And so let us change the batteries and then follow some simple steps for troubleshooting.

Step 1 – Remove the batteries from the remote. And unplug your TV from the power source.

Change the batteries of Spectrum Remote

Step 2 – Wait for a few seconds and then plug back the power cords into the TV and cable box.

Step 3 – Then insert a new set of batteries and check if the remote has started work.

Method 2 – Perform an Entire Power Cycle

Sometimes due to technical glitches of the entire system, the remotes do not work. Yes, then the TV or the console might not be in a state to accept the signal from the remote. A simple power cycling of the entire setup will fix the issue in a few minutes.

Step 1 – Turn off all the devices that are compatible with the Spectrum TV remote.

Step 2 – Now disconnect them from the power sources. And press the power button on your remote and hold it for a few seconds till you are sure that every device is discharged.

Press Spectrum remote power button

Step 3 – Now remove the batteries from the remote. Wait for 5-7 minutes and then plug back the power cords and again wait for a few minutes.

Step 4 – Turn on the setup. Use the remote to scroll through various options and check if it has started working.

Method 3 – Check for Stuck Buttons

Pressing all the buttons on the remote has proved to be an effective means of resolving the Spectrum DVR not working issue.

Check for Stuck buttons

It can happen that a button gets stuck or that dust accumulates underneath them, which prevents them from functioning. And so all we need to do is free these buttons and get your Spectrum remote back to work.

Method 4 – Enable Control of TV

You might not be able to control the TV or console due to which the remote might not work. So, with your remote, you could control the cable box, but not the TV.

And so here is the setting you need to check. Follow the steps given below –

Step 1 – Press the menu button on your Spectrum TV remote.

Step 2 – Then select the Settings & Support section using the arrow keys. And open it.

Step 3 – Go to the Remote Control Option. Next click on the Connect Remote to TV option.

Step 4 – Next a list of various TV options will be displayed. Choose your TV and hit the Enter button.

Once the TV option is enabled, use your remote and check the control keys.

Bonus Tips –

  • Maybe there is an object that might be coming between the screen and remote. Hence take away the object and try changing the channel.
  • If there is more than one channel associated with your remote then make sure that you are directing the remote to the correct receiver.
  • Change the settings from cable to TV using the Home and CBL button, so that the signals are caught directly by the TV.
  • Check the mode key buttons and whether your Spectrum remote is working in the correct mode.
  • If none of the methods mentioned above work, then reset your Spectrum remote control to factory settings.
  • Lastly, get in touch with customer support for further assistance with your equipment.


Spectrum remote not working issue is a do it yourself. You can resolve it from your end easily.

You just need to follow the instructions carefully and pay attention to what would be causing the problem.

Once you know about the reason or the setting due to which the remote might not be working, you can troubleshoot it accordingly.

However, if nothing works for you, then get in touch with Spectrum DVR customer support.

Remember to share in the comments what other methods worked for you other than the methods mentioned above.

Leave a Comment

Your email address will not be published.